Origin Storage Inception TLC830 Pro Series

Best current price£33.24from PCHUB.UK
Best offers
Shopping.co.uk recommended and popular offers
Origin Storage Inception Ssd 256Gb 2.5In Sata 3D Tlc
Visit shop
Best current price£33.24from PCHUB.UK
Shopping.co.uk recommended and popular offers
Origin Storage Inception Ssd 256Gb 2.5In Sata 3D Tlc
Visit shop2 offers from £33.24 - £39.89
View price history by clicking the chart icon.
The Origin Storage Inception TLC830 Pro Series 256GB SSD is designed for PC and laptop users seeking a reliable storage upgrade. Its primary benefit is enhanced data access speeds through 3D TLC NAND technology and a SATA III interface, offering a significant performance boost over traditional hard drives. A key consideration is its 2.5-inch form factor and 7mm height, which ensure broad compatibility but require a compatible drive bay.
| Series | Inception TLC830 Pro |
|---|---|
| Model Part Number | 3812440-OS |
| Brand | Origin Storage |
TLC (Triple-Level Cell) NAND stores three bits of data per cell, offering a good balance of capacity, cost, and performance for general use. MLC (Multi-Level Cell) stores two bits per cell and typically offers higher endurance and slightly better performance but is more expensive.
The SSD uses a standard 2.5-inch form factor and SATA interface, common in laptops from the last decade. Its 7mm height also aids compatibility with thinner models. However, always verify your laptop's specifications for a 2.5-inch drive bay and SATA connection.
Most modern operating systems (Windows, macOS, Linux) have built-in drivers for SATA SSDs. You typically do not need to install specific drivers unless advised by your motherboard manufacturer or for advanced features.
The 7mm height is a slimmer profile than the older 9.5mm standard for 2.5-inch drives. This allows it to fit into a wider range of devices, particularly modern ultra-thin laptops. If your device has a 9.5mm bay, a simple spacer can often be used.
SATA III is the third major revision of the Serial ATA interface, offering a maximum theoretical throughput of 6 Gigabits per second (Gb/s), which translates to approximately 600 megabytes per second (MB/s) in ideal conditions. This is the standard for high-speed data transfer for 2.5-inch SSDs and HDDs.
Yes, this SSD is designed as a direct replacement for traditional 2.5-inch SATA hard drives in PCs and laptops. It will significantly improve your system's speed and responsiveness.
Yes, this SSD supports the TRIM command, which is essential for maintaining SSD performance and longevity by allowing the operating system to inform the drive which data blocks are no longer in use.
Ensure the SATA data and power cables are securely connected to both the SSD and the motherboard/power supply. Try a different SATA port or cable. Check if the SATA controller is enabled in BIOS.
Verify that the SSD is connected to a SATA III port on your motherboard. Ensure the correct drivers are installed for your storage controller. Check that the drive is not nearly full, as performance can degrade.
Confirm that the SSD firmware is up-to-date. Ensure the operating system is correctly installed or cloned. Test the SSD with diagnostic tools to check for errors.
Format the SSD using disk management tools on another computer or bootable USB drive. Ensure the installation media is valid and the BIOS is set to boot from the correct device.
Compatibility:
The Origin Storage Inception TLC830 Pro Series SSD uses a standard 2.5-inch form factor and a SATA III interface. It is compatible with most desktop PCs and laptops that feature a 2.5-inch drive bay and a SATA port. The 7mm height ensures it fits into slimline devices. Ensure your motherboard or laptop supports SATA III for maximum performance, though it is backward compatible with SATA II.
Setup:
Care: