Best current price£5.95from B&Q
Shopping.co.uk recommended and popular offers
B&Q£5.95Visit shop B&Q - 57mm Hole SawM35 High-Speed Steel Metal Hole Saw With 39mm Cutting Depth For WoodPlasticMetal SheetsAnd More.
Visit shop3 offers from £5.95 - £6.45
View price history by clicking the chart icon.
This Amtech 57mm Hole Saw is designed for professionals and DIYers needing to create precise holes in various materials like wood, plastic, and metal sheets. Its key benefit is the durable M35 HSS construction providing heat resistance and longevity. A potential caveat is its specific 39mm cutting depth, which may limit its use for thicker materials. This versatile tool features efficient cutting with 4-6 TPI and is compatible with a 7/16” chuck via the Amtech M1517 hex arbour.
| Model Part Number | 57mm |
|---|---|
| Brand | Amtech |
The Amtech 57mm Hole Saw has a maximum cutting depth of 39mm.
It is suitable for cutting clean and accurate holes in wood, plastic, metal sheets, and composite materials.
The hole saw itself is designed to fit into a 7/16” chuck, typically when used with the Amtech M1517 hex arbour.
Yes, it is recommended to use the Amtech M1517 hex arbour for proper compatibility and safe operation with standard drills.
This hole saw features 4-6 Teeth Per Inch (TPI) for efficient cutting.
After use, remove debris with a brush. Lightly oil the hole saw after cleaning to prevent rust, especially after cutting metal. Store in a dry environment.
While it can cut metal sheets, its 39mm cutting depth and construction are best suited for standard sheet metal rather than very thick plates. For thicker materials, specialized tools might be required.
Ensure the drill speed is appropriate for the material (slower for metal, faster for wood/plastic). Check that the teeth are sharp and free from debris. Verify you are using the correct arbour and that it is securely fastened.
Reduce drill speed. Apply a cutting lubricant when drilling into metal. Allow the hole saw to cool down between cuts if necessary.
Check that the hole saw is securely attached to the arbour and that the arbour is firmly clamped in the drill chuck. Ensure the pilot drill bit is centered and not damaged.
Do not force the cut. Back the hole saw out periodically to clear material chips. Ensure the workpiece is securely clamped and not flexing.
Setup: Securely attach the Amtech 57mm Hole Saw to the Amtech M1517 hex arbour (sold separately). Ensure the arbour's pilot drill bit is properly seated. Insert the arbour into your drill's 7/16” chuck and tighten firmly. Compatibility: This hole saw is designed to work with drills featuring a 7/16” chuck. The Amtech M1517 hex arbour is recommended for optimal compatibility and safe operation. Care: After each use, clean the hole saw by removing any debris, sawdust, or metal shavings. A wire brush can be effective. For best results and to prevent rust, lightly oil the hole saw after cleaning, especially after cutting metal. Store the hole saw in a dry place to maintain its condition.
