Unibond Ultraforce Ready Mixed Grey Wall Tile Grout - Grey

Drying times can vary depending on environmental conditions (temperature and humidity), but typically, it takes 24-72 hours for complete curing. Refer to the product packaging for specific instructions.

This grout is specifically designed for wall tiles. Using it on floors is not recommended as it may not withstand the foot traffic.

You will need a grout float or similar tool for application, a damp sponge for cleaning, and a bucket of clean water.

The amount of grout needed depends on the size and number of tiles, and the width and depth of the grout lines. Consult a grout coverage calculator or the product packaging for specific guidelines.

Use a damp sponge, wiping diagonally across the tiles. Rinse the sponge frequently with clean water to avoid spreading the grout.

No, this grout is ready-mixed with a specific grey colour. It is not designed to be tinted.

While the grout is water-resistant, it's not entirely waterproof. It is suitable for areas where water exposure is expected, but prolonged immersion should be avoided. Ensure the surface is sealed if needed.

Ensure the grout was mixed thoroughly before application. Apply with consistent pressure and technique.

Ensure joints are not too wide. Allow adequate curing time and avoid excessive water exposure during the curing phase.

Regularly clean the grouted area. In high-moisture areas, ensure adequate ventilation and consider using a mould-resistant grout cleaner.