Best current price£11.17from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£11.17Visit shop Faithfull Bt316 Professional Hacksaw 300Mm (12In)
Visit shop
B&Q£15.05Visit shop - Faithfull Bt316 Professional Hacksaw 300mm (12In) Faihs300P
Visit shop11 offers from £11.17 - £25.79
View price history by clicking the chart icon.
The Faithfull Professional Hacksaw (300mm) is designed for tradespeople and serious DIYers needing a robust tool for cutting various materials like metal and plastic. Its key benefit is the rigid frame and comfortable grip, ensuring accurate and controlled cuts. A potential caveat is that it's optimized for standard 300mm blades, limiting options for specialized cutting lengths.
| Model Part Number | FAIHS300P |
|---|---|
| Brand | Faithfull |
This hacksaw is designed for standard 300mm (12-inch) hacksaw blades. Always select a blade with the appropriate TPI (Teeth Per Inch) for the material you are cutting, such as fine-tooth blades for hard metals and coarser blades for softer materials or plastics.
Insert the blade with teeth pointing forward. Tighten the tensioning screw until the blade is taut. A good test is to pluck the blade; it should produce a clear 'ping' sound. Avoid over-tensioning, which can snap the blade.
The secondary blade position allows you to mount the blade at a 90-degree angle to the frame. This is useful for making cuts in confined spaces or for flush cutting applications, such as cutting a pipe close to a wall surface.
After each use, wipe down the blade and frame to remove metal filings and debris. Store the hacksaw in a dry environment to prevent rust. Periodically check the tensioning mechanism for smooth operation.
While technically possible with the right blade, this hacksaw is primarily designed for cutting metal and plastic. For wood, a dedicated handsaw or power saw is generally more efficient and appropriate.
Loosen the tensioning screw at the end of the frame. Remove the old blade from the holders. Insert the new blade with teeth pointing forward, then retighten the tensioning screw until the blade is taut.
Ensure the blade is correctly tensioned and not over-tightened. Check that the teeth are pointing forward. Use the correct blade type for the material being cut.
Ensure the blade is fully seated in both blade holders and that the tensioning mechanism is securely tightened.
Verify the blade is sharp and appropriate for the material. Ensure proper tension and that the frame is rigid. Apply consistent, steady pressure.
Ensure your grip is relaxed and not overly tight. The comfort grip is designed for extended use, but proper technique is still important.
Setup:
Compatibility:
Care:
