Hemway Tile Ready Mixed Grout & Fix Adhesive - Cream

Hemway Ready-Mixed Grout sets in approximately 24 hours, but full cure can take up to 72 hours.

Yes, Hemway Ready-Mixed Grout is suitable for use on both wall and floor tiles.

Yes, the water-resistant and mould-resistant properties make it ideal for wet rooms, showers, and bathrooms.

One container covers approximately 15 square meters.

Sealing is recommended for added protection and longevity, but the grout itself is water-resistant.

You will need a grout float, a sponge, and a bucket of water.

Yes, Hemway Ready-Mixed Grout is non-toxic and eco-friendly with a low VOC content.

It is suitable for most tiles, including ceramic, porcelain, glass, mosaic, limestone, marble, cement, and plaster tiles. It is specifically designed for glazed wall tiles.

Ensure the grout joints are the correct width. Avoid applying grout in direct sunlight or very high temperatures as it can dry out too quickly. Make sure that the tiles are firmly installed and stable.

Ensure proper ventilation and that the room temperature is within the recommended range. Check for any moisture sources that might be affecting the drying process.

Ensure the grout is mixed thoroughly before application. Avoid applying too much or too little grout in the joints, and ensure even pressure is applied during the cleaning phase.

Clean up spills and stains as soon as they occur. Consider sealing the grout to protect against stains. For stubborn stains, use a grout cleaner.

Ensure the grout is stored in a cool place, away from direct sunlight. Make sure your application tools are designed for the grout.