Setup, Compatibility & Care
Installation: To install the pedals, you will need a 15mm pedal wrench or an 8mm hex key. Ensure you apply a small amount of bicycle grease to the pedal threads before installing them into your crank arms to prevent seizing. Remember that the left pedal is reverse-threaded (turn counter-clockwise to tighten), while the right pedal follows standard threading (turn clockwise to tighten).
Compatibility: These pedals are compatible with standard mountain bike crank arms featuring 9/16" threading.
Care: Periodically check the tightness of the steel pins to ensure none have backed out during rides. Keep the pedals clean using mild soap and water; avoid using high-pressure power washers, as they can force water past the bearing seals. If you notice play in the axle over time, the sealed cartridge system is designed for low-maintenance, long-term performance.