Prym Zipper Foot

The foot's design allows the needle to stitch extremely close to the zipper teeth, and the specialized plastic sleds guide the zipper tape perfectly, hiding the teeth within the seam allowance from the right side of the fabric.

This foot is designed for sewing machines with a standard clip-on, low-shank presser foot system. Always check your machine's specifications for compatibility.

The plastic foot comes with three different sized adapters. Select the adapter that best matches the width of your invisible zipper tape and slide it securely onto the designated area of the plastic foot.

This foot is specifically designed for invisible zippers, also known as Concealed Zippers. The adapters help accommodate different widths of invisible zipper tape.

Wipe the foot clean with a dry or slightly damp cloth after use. Avoid using harsh cleaning agents.

The Prym Invisible Zipper Foot is an accessory designed to enhance the capabilities of your sewing machine, especially for creating neat invisible zipper insertions.

Ensure the correct size plastic adapter is firmly attached to the foot and that it matches the width of your zipper tape. Check that the zipper tape is lying flat and is not folded or twisted.

Verify that the needle is positioned correctly relative to the zipper teeth and the foot's guiding channel. You may need to slightly adjust the fabric placement as you sew, allowing the foot's sled to guide the tape.

Confirm that your sewing machine uses a standard clip-on, low-shank presser foot system. This foot is not compatible with high-shank machines or those requiring screw-on feet without an adapter.

Check that you are not pulling or stretching the zipper tape as you sew. The foot is designed to guide it; allow the foot to do the work. Ensure the fabric is also feeding evenly.