Albe Wood Effect Laminate Flooring - 8mm

The AC4 rating indicates the flooring's resistance to abrasion. AC4 is suitable for heavy domestic and moderate commercial use, meaning it can withstand significant foot traffic and wear.

While it has an R10 slip resistance, laminate flooring is generally not recommended for very wet areas like bathrooms due to potential moisture damage. Use in such areas would require extreme caution and possibly additional sealants not typically part of standard installation.

Wipe up spills immediately with a soft, dry cloth. For tougher spots, use a slightly damp cloth or mop with a pH-neutral cleaner. Avoid using excessive water, as it can seep into the seams and damage the flooring.

An appropriate underlayment is crucial for comfort, sound reduction, and moisture protection. Consult the flooring manufacturer's recommendations or a flooring professional for the best type of underlay for your specific subfloor and desired performance.

Each pack contains 8 planks, covering a total area of 1.99 square meters.

Please refer to the B&Q product packaging or website for specific warranty details, as these can vary.

Yes, the click system is designed for straightforward DIY installation. However, ensuring a level subfloor and proper acclimation are key steps for a successful installation.

Ensure the locking mechanisms on both planks are clean and free of debris. Check for any damage to the tongue or groove.

This can be due to an uneven subfloor or insufficient acclimation. Ensure the subfloor is level and planks were allowed to acclimatize properly. Check that all planks are fully engaged.

For minor scuffs, try cleaning with a damp cloth and a mild cleaner. For deeper scratches, consider using a laminate repair kit, or if extensive, plank replacement may be necessary.

This often indicates issues with the subfloor or underlayment. Ensure the subfloor is perfectly flat and the underlay is appropriate and correctly installed. Allow for expansion gaps.