ASRock X870 Pro-A WiFi ATX Motherboard - DDR5

This motherboard supports AMD Ryzen 6000, 7000, 8000, and 9000 series processors with Socket AM5. Always check the latest CPU support list on the ASRock website for specific model compatibility and required BIOS versions.

It supports up to 256 GB of DDR5 RAM across four DIMM slots. It supports both ECC and Non-ECC memory types.

The 8 Layer PCB provides more stable signal traces and improved power shapes, leading to lower operating temperatures and higher energy efficiency. This is particularly beneficial for memory overclocking, allowing for potentially higher stable RAM speeds.

Yes, the motherboard features a 'Blazing M.2' slot that supports PCI Express 5.0, offering significantly higher bandwidth (up to 128Gb/s) for compatible NVMe SSDs.

It includes Dragon 2.5 Gb/s LAN for high-speed wired networking and supports the latest Wi-Fi 7 (802.11be) standard for fast wireless connectivity, along with Bluetooth 5.4.

The motherboard has onboard RGB and addressable RGB headers that can be connected to compatible LED devices. You can synchronize lighting effects using ASRock's POLYCHROME RGB software or advanced control through SignalRGB.

It features a 7.1 Channel HD Audio output powered by the Realtek ALC897 audio codec.

The Asrock X870 Pro-A WiFi is an ATX form factor motherboard, which is a standard size suitable for most mid-tower and full-tower PC cases.

Verify all power connections (24-pin ATX, 8-pin EPS, GPU power). Ensure the power supply switch is on. Reseat RAM modules and CPU. Check for any short circuits between the motherboard and the case.

Ensure the CPU is correctly seated and the socket lever is closed. Check if RAM modules are in the correct slots for dual-channel operation and are fully seated. Try booting with a single RAM stick.

If overclocking, reset BIOS settings to default. Monitor CPU and RAM temperatures. Ensure adequate cooling. Update BIOS and drivers. Test RAM with a memory diagnostic tool.

Check USB device connections. Ensure USB drivers are installed correctly via Windows Device Manager. Try different USB ports. Verify internal USB header connections on the motherboard.

Ensure the Dragon 2.5 Gb/s LAN drivers and Wi-Fi drivers are installed. Check network cable connections. Reboot router and modem. Verify Wi-Fi is enabled in BIOS and Windows.

Ensure the M.2 SSD is compatible (PCIe Gen5). Verify it is correctly installed in the M.2 slot and the retention screw is secure. Check if the M.2 slot is enabled in the BIOS and if it shares bandwidth with SATA ports that might be disabled.