Best current price£77.90from Vevor UK
Shopping.co.uk recommended and popular offers
Vevor UK£77.90Visit shop VEVOR Magnetic Lifter, 660 lbs/300 kg Pulling Capacity, 2.5 Safety Factor, Neodymium & Steel, Lifting Magnet with Release, Permanent Lift Magnets, Heavy Duty Magnet for Hoist, Shop Crane, Block, Board
Visit shop1 offer from £77.90
View price history by clicking the chart icon.
The VEVOR Magnetic Lifter PML-300 is an essential industrial tool designed for factory workers, warehouse staff, and professionals in the mining industry who require a secure way to transport heavy steel objects. With a robust 300 kg lifting capacity and a specialized U-shaped groove, it provides reliable performance for both flat and cylindrical steel surfaces; however, users should note that the unit requires a clean, flat surface to ensure full magnetic contact and peak safety during operation.
| Model Part Number | PML-300 |
|---|---|
| Brand | VEVOR |
No, the PML-300 uses permanent N42 magnets and requires no electrical power or batteries.
Magnetic lifters are generally designed for carbon steel. Stainless steel varies in magnetic permeability and may not be compatible.
The device is designed with a 2.5 safety factor, meaning it is tested to handle loads beyond its rated capacity for increased security.
It is not recommended. For optimal safety, the contact surface must be flat and smooth to allow for full magnetic adhesion.
You will feel the magnetic pull increase as you rotate the handle to the 'ON' position until it locks with the limit bolt.
Verify that the surface is clean, flat, and free of paint or scale; ensure the magnet is fully engaged.
Check the rotating shaft for debris or lack of lubrication; ensure the safety switch is not jammed.
Gently clean the surface with fine-grit sandpaper and apply a thin layer of machine oil for protection.
Before using the PML-300, ensure the contact surface of the load is free from debris, rust, and thick paint, as these can create an air gap and significantly reduce magnetic force. To operate, place the lifter centrally on the material, rotate the handle to the 'ON' position, and engage the limit bolt. For care, keep the bottom magnetic face clean and wipe it down with an oily cloth to prevent surface rust when not in use. Store the unit in a dry environment to maintain the integrity of the N42 magnets.
