Sanding Belts - 5 Pack - 10mm x 330mm - 60 Grit

These sanding belts are crafted from high-quality aluminium oxide, known for its durability and effective abrasive properties.

The belts have a 60 grit coarseness, which is suitable for material removal and initial smoothing.

Each pack contains five sanding belts.

The nominal size of each belt is 10mm in width and 330mm in length.

While 60 grit is effective for material removal, for fine finishing, you would typically need belts with a higher grit number (e.g., 120, 180, 220 grit).

These belts are designed for belt sanders that specifically accommodate the 10mm x 330mm size. Always check your sander's specifications.

Store the belts in a dry environment, away from extreme temperatures and humidity, to maintain their adhesive and abrasive qualities.

Ensure the belt is correctly seated on the rollers and that the tension is properly adjusted according to your sander's manual. Check for any debris on the rollers that might be causing misalignment.

Reduce the pressure applied during sanding. Ensure you are not overheating the belt. Check if the material being sanded is excessively hard or contains contaminants. Clean dust from the belt regularly.

Verify the belt is tracking straight. Check that the rollers on your sander are clean and free of debris. Ensure consistent pressure and movement across the workpiece.