MeacoDry Arete H13 HEPA Filter - Grey

The H13 HEPA classification means it meets stringent international standards, capturing 99.75% of particles as small as 0.3 micrometers in diameter, which includes many common allergens and pollutants.

For optimal performance and consistent air purification, it is recommended to replace the filter approximately every 3 months. This duration can vary based on environmental conditions and how frequently the dehumidifier is used.

Yes, your Arete dehumidifier can operate without the H13 HEPA filter. However, it will not provide the same level of medical-grade air purification, only standard dust filtration and dehumidification.

Yes, using the H13 HEPA filter may slightly increase the dehumidifier's noise levels and reduce its water extraction efficiency. This is a trade-off for improved air quality.

No, H13 HEPA filters are not washable and are not recyclable. They should be disposed of with general household waste after use.

For health and safety reasons, once the protective plastic bag is opened, the filter cannot be returned. This policy ensures the integrity and hygiene of filters for all customers.

While the H13 HEPA filter is excellent at removing particulate matter, it is not specifically designed for odor removal. For comprehensive odor control, you might look for filters with activated carbon alongside HEPA filtration.

Ensure the H13 HEPA filter is replaced approximately every 3 months. An old, clogged filter cannot effectively capture particles.

This is a known characteristic when using the HEPA filter. The increased resistance from the filter slightly reduces extraction efficiency. If this is a concern, remove the HEPA filter when maximum dehumidification is required, or consider if the filter needs replacement.

A slight increase in noise is a known trade-off for enhanced air quality when the HEPA filter is installed. If the noise is excessive or unusual, ensure the filter is installed correctly and not obstructing any components.

Double-check that you have the correct H13 HEPA filter for your specific MeacoDry Arete model (18L, 20L, or 25L). Ensure it is oriented correctly according to your dehumidifier's manual.