Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaking paint. Lightly sand glossy surfaces to improve adhesion. If painting new or bare wood, apply a suitable primer. For metal surfaces, use a dedicated metal primer.
Application: Stir the paint thoroughly before use. Apply two coats using a good quality brush, roller, or spray gun. Allow adequate drying time between coats (check product tin for specific times, typically a few hours).
Compatibility: Suitable for interior wood and metal. Not recommended for exterior use or high-moisture areas like bathrooms without additional protective coatings.
Care: Clean brushes and equipment immediately after use with water. For cleaning decorated surfaces, use a soft cloth with a mild detergent solution. Avoid abrasive cleaners.