Vision Koski Grey Stockingfoot Waders - Vision

The Vision Koski waders provide a waterproof and windproof barrier. For cold weather, layering appropriate thermal clothing underneath is recommended for warmth, as the waders themselves do not offer insulation.

Refer to the Vision sizing chart. Pay close attention to chest, waist, inseam, and shoe size measurements to ensure a proper fit, especially considering the neoprene stockingfoot.

Yes, these waders are suitable for saltwater use. However, it is crucial to rinse them thoroughly with fresh water after each saltwater use to prevent corrosion and salt buildup.

PFC-free DWR (Durable Water Repellent) coatings provide water resistance without using perfluorinated chemicals, which are known to be environmentally persistent and potentially harmful. This makes the waders a more eco-conscious choice.

The T4™ fabric is engineered for durability and comfort. Combined with the reinforced lower body, it offers robust protection against abrasion and wear in challenging aquatic environments.

Minor pinhole leaks can often be repaired using specialized fabric repair kits or seam sealers designed for outdoor gear. For larger tears or seam failures, professional repair or replacement might be necessary.

Minor scratches on the TPU pouch usually do not affect its waterproof integrity. For significant damage that compromises the seal, replacement of the pouch might be considered.

Inspect seams for damage. If minor, consider using a seam sealer designed for technical fabrics. For significant breaches, contact customer support.

Check for punctures in the reinforced lower leg or general wear. Ensure DWR coating is still effective; reapply if necessary. If the fabric itself is compromised, repair or replacement may be needed.

Ensure gravel guards are properly tucked inside the wading boots and cinched around the boot laces. Adjusting the fit of the wading boot can also help.

Clean the zipper track with water and a soft brush to remove any dirt or grit. Lubricate with a zipper wax or silicone spray if needed.

Ensure you have selected the correct wader size that accommodates your foot size within the neoprene sock. Try different wading boot combinations to find the best fit.