Novus Staples - Type 37/4 - 4 mm

'Type 37/4' is the specific designation for these staples, indicating their size, wire gauge, and compatibility with certain stapling machines. Always confirm your stapler uses this type.

These staples are best suited for securing textiles, cardboard, paper, and light wire netting. For very thick or dense materials, a staple with a longer leg length and possibly a heavier gauge wire might be required.

Each pack contains 2000 staples.

While made of superhard fine wire, they are not specifically advertised as rust-proof. For best results and longevity, store them in a dry environment.

They are designed for compatibility with hand-powered and automatic stapling machines that specifically require Type 37/4 staples. It's crucial to check your stapler's specifications.

The dimensions are approximately 4 mm in height, 10.6 mm in width, and a 4 mm leg length.

Ensure you are using the correct staple type (37/4) and size for your stapler. Check for any bent or damaged staples in the magazine and clear them. Inspect the stapler's anvil and firing mechanism for debris or damage.

Verify the staple leg length (4mm) is appropriate for the material thickness. Ensure the stapler is set to the correct depth setting, if applicable. Check if the stapler mechanism requires more force or if the staples themselves are not sharp enough (though rare with new staples).

This often indicates a compatibility issue with the stapler. Ensure the stapler's magazine is aligned correctly with the staples and that the anvil is properly set for the staple size. Check for wear and tear on the stapler.