Bosch Filter - Red

This filter (MPN 2 608 000 663) is specifically designed for the Bosch GAS 18V-10 and GAS 18V-10L Professional cordless vacuum cleaners. Please check your vacuum's manual for compatibility.

It is recommended to clean the filter when you notice a decrease in suction power or when it appears visibly dirty. For regular use, cleaning weekly or bi-weekly is a good practice.

No, the filter should only be cleaned by hand rinsing under cold water. Do not use any detergents or place it in a washing machine or dryer, as this can damage the filter material.

The filter must be completely air-dried. This process typically takes at least 24 hours. Ensure it is bone dry before putting it back into the vacuum.

A HEPA filter is designed to capture very fine particles, including dust, allergens, and microscopic debris, leading to cleaner air exhaust from your vacuum cleaner.

The MPN (Manufacturer Part Number) for this Bosch HEPA filter is 2 608 000 663.

The filter has a width of 125 mm and a height of 155 mm.

Check if the filter is clogged with dust or debris. Remove and clean the filter according to the care instructions. Ensure the filter is completely dry before reinstallation.

Inspect the filter for tears or holes. If damaged, it needs to be replaced with a new Bosch 2 608 000 663 filter to maintain effective filtration and prevent debris from entering the motor.

Ensure the filter was washed thoroughly and dried completely. A damp filter can develop odors. If the smell persists, the filter may need replacement.