SecureFix Direct Wire Mesh Fencing Fixing Hooks - Silver
3/8" Galvanised Double Fencing Hooks designed for use on Intermediate Posts to support wire mesh f...3/8" Galvanised Double Fencing Hooks designed for use on Intermediate Posts to support wire mesh fencing on 4" posts. Manufactured using galvanised steel, these hooks are weather-resistant and durable, preventing corrosion and rust to ensure your fence remains upright for a long time. Specifications: Total Thread Length: 150MM, Thread Thickness: 9.5MM, Collar Diameter: 26MM, Collar Thickness: 12MM, Outer Hook Dimensions (L x W): 66MM x 46MM, Inner Hook Dimensions (L x W): 26MM x 21MM.
This guide is for DIYers and professional installers seeking a durable solution for securing wire mesh fencing. The SecureFix Direct Galvanised Double Fencing Hooks offer a robust and weather-resistant method to support fencing on intermediate posts, ensuring long-term stability. A potential caveat is the specific requirement for 4" posts, limiting their direct application on other post sizes without adaptation.
All features
Colour
Silver
Brand
SecureFix Direct
Extended Product Information
FAQs
What size post are these hooks designed for?
These hooks are specifically designed for intermediate posts with a diameter of approximately 4 inches (100mm).
What type of fencing can I use these hooks with?
They are designed to support wire mesh fencing.
Do I need to drill a hole before installing the hooks?
It is highly recommended to drill a pilot hole slightly smaller than the thread diameter for easier installation and to prevent wood splitting, especially in harder woods.
Are these hooks suitable for metal posts?
No, these hooks are designed for use in wooden posts.
How far apart should I space the hooks?
Spacing depends on the type of wire mesh and the required tension. Consult your fencing material's guidelines, but a common spacing for intermediate posts is typically between 6 to 10 feet (1.8 to 3 meters).
What is the purpose of the collar on the hook?
The collar helps to prevent the hook from being driven too far into the post and provides a stable base for the hook's shaft.
How do I clean the hooks if they get dirty?
The galvanised surface can be cleaned with a damp cloth. Avoid abrasive cleaners that could damage the protective coating.
Troubleshooting
Hook is difficult to screw into the post.
Drill a pilot hole slightly smaller than the hook's thread diameter. Ensure the post is not excessively hardened or brittle. Use a steady, rotational force.
Fencing mesh is not sitting securely.
Adjust the hook's position or angle. Ensure the mesh is properly tensioned before securing it to the hook. Consider using additional ties to fasten the mesh to the hook.
Hook appears to be rusting.
While galvanised steel is highly resistant, prolonged exposure to harsh chemicals or constant abrasion in specific environments might affect the coating. Minor surface rust can often be wiped away. For significant rust, the hook may need replacement to maintain structural integrity.
Pros and Cons
Pros
Excellent corrosion and rust resistance due to galvanised steel.
Provides strong support for wire mesh fencing.
Durable construction ensures a long service life.
Designed for easy and secure attachment to posts.
Cons
Primarily designed for 4" intermediate posts, limiting versatility on other post sizes.
Requires appropriate tools for installation into wooden posts.
Galvanised finish may slightly alter appearance compared to other materials.
Setup, Compatibility & Care
Setup:
Identify intermediate posts that are approximately 4 inches (100mm) in diameter.
Using appropriate tools, such as a drill with a pilot hole bit or a hammer and mallet (depending on wood density), drive the threaded end of the hook into the wooden post.
Ensure the hook is firmly seated and perpendicular to the post for optimal support.
Repeat for subsequent posts, maintaining consistent spacing according to your fencing plan.
Drape the wire mesh fencing over the hooks and secure it as needed, often using wire ties or clips to the hook itself.
Compatibility:
These hooks are specifically designed for use on 4" (100mm) intermediate wooden posts.
They are intended to support wire mesh fencing.
Care:
The galvanised coating provides excellent protection. No regular maintenance is typically required.
Periodically check for any physical damage or loosening from the post, especially after severe weather.
If dirt or debris accumulates, it can be wiped clean with a damp cloth.