William Morris Strawberry Thief Wallpaper - Green

The specific pattern repeat for the William Morris Strawberry Thief Wallpaper (W0171/01) would be detailed in the product's technical specifications. Please refer to the manufacturer's detailed product sheet or website for the exact measurement, typically stated in centimeters or inches.

To determine the number of rolls needed, measure the height and width of your walls to calculate the total square footage. Divide this by the square footage covered by one roll (this information is usually on the roll label or product description). Always round up to ensure you have enough and account for pattern matching and trimming.

This wallpaper is typically described as 'spongeable' or 'wipeable', meaning light marks can be carefully removed with a slightly damp cloth. It is not considered fully washable or scrubbable, so avoid harsh scrubbing or excessive moisture.

Clarke & Clarke generally recommends a high-quality wallpaper adhesive suitable for paste-the-wall or paste-the-paper application, depending on the specific product instructions. Always check the manufacturer's recommendations on the wallpaper packaging or their website.

While technically possible, applying wallpaper to ceilings is significantly more challenging due to gravity and application difficulty. This particular design might be better suited for walls where its intricate pattern can be fully appreciated without the added complexities of ceiling installation.

William Morris wallpapers are known for their quality and durability when applied correctly in suitable environments. The design's intricate print is generally resilient to fading under normal indoor light conditions.

Gently lift the edge of the wallpaper where the bubble/wrinkle is located and re-smooth it with a clean, damp roller or a wallpaper brush, working from the center outwards. Ensure the adhesive was applied evenly.

Carefully adjust the second strip before the adhesive fully sets. Ensure you are maintaining the correct pattern repeat and trimming edges precisely. Double-check measurements and the starting point.

Verify the wall surface is properly prepared (clean, dry, and primed). Ensure the correct type of wallpaper adhesive is used and applied generously and evenly to both the wall and the paper (if required). Check for any drafts that might dry the adhesive too quickly.

Order a sample to view in the intended room under its typical lighting conditions before committing to a full purchase. Be aware that colours can appear differently on screen versus in person.