Best current price£1.49from Scan Computers
Shopping.co.uk recommended and popular offers
Scan Computers£1.49Visit shop Cables Direct Xclio Cat6a Snagless Moulded Gigabit Ethernet Cable Rj45 0.5M White Art-100W
Visit shop
B&Q£5.20Visit shop B&Q - Cat6A Sstp Lszh Rj45 Network Ethernet Patch 10 Gigabit Cable 1M White
Visit shop48 offers from £1.49 - £31.99
View price history by clicking the chart icon.
This Cables Direct Cat6a Ethernet cable is designed for users needing high-speed, reliable network connections, especially for 10 Gigabit Ethernet applications. Its primary benefit is superior performance and reduced interference thanks to S/FTP shielding. A potential caveat is its specialized nature, meaning it's most beneficial in environments that can fully leverage its 10Gbps capabilities.
| Series | Cat6a |
|---|---|
| Model Part Number | ART-130W |
| Brand | Cables Direct |
Cat6a is designed to support 10 Gigabit Ethernet (10GBASE-T) up to 100 meters, whereas Cat5e typically maxes out at 1 Gigabit Ethernet (1000BASE-T). Cat6a also offers better performance at higher frequencies (600 MHz vs 100 MHz) and generally has improved shielding.
Yes, this Cat6a cable is backward compatible and works perfectly with Gigabit Ethernet (1000BASE-T). However, you will only achieve 1Gbps speeds, not the full 10Gbps capability, if the connected devices are only Gigabit capable.
S/FTP stands for Screened/Shielded and Foil Twisted Pair. It means that each individual pair of wires within the cable is wrapped in foil shielding, and the entire bundle of pairs is also covered by an overall braided shield. This provides superior protection against electromagnetic interference (EMI).
LSZH stands for Low Smoke Zero Halogen. Cables with LSZH jackets are designed to emit very little smoke and no halogenated acids when exposed to fire, making them safer for use in enclosed or poorly ventilated areas.
This cable is designed for indoor use. It is not rated for outdoor exposure, which can degrade the jacket material and connectors over time due to UV light and moisture.
To achieve 10Gbps speeds, all components in the network path must support it, including the network interface cards (NICs) on your devices, the switches or routers you connect through, and the cable itself must be Cat6a or higher. Both ends of this cable must connect to 10Gbps-capable ports.
The AWG (American Wire Gauge) rating for this cable is 26 AWG. This refers to the thickness of the individual conductors within the cable.
Ensure the RJ45 connectors are fully seated in their ports. Check that the cable is not physically damaged. Test with a known good cable and port to isolate the issue. Verify that both connected devices support the Ethernet standard being used.
Confirm that both connected devices and any intermediate network hardware (switches, routers) support 10 Gigabit Ethernet. Ensure the cable is a Cat6a and that the connection is established at the highest possible speed in the device's network settings. Check for any physical damage or kinks in the cable.
The snagless boot is designed to protect the clip. If the clip is broken, the cable may not stay securely in the port. Replace the cable if the connector is damaged to ensure reliable connection.
Ensure the S/FTP shielding is intact and the cable is not run parallel and too close to high-voltage power cables. Route the network cable separately from power sources where possible.
Setup:
Compatibility:
Care:
