Best current price£35.92from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£35.92Visit shop Cubetech Flexible Insulated Ducting 100Mm (4 Inch) 10 Metre - Anti-Condensation Aluminium Ventilation Hose For Extractor Fan, Tumble Dryer, Hvac, Loft 5060808482403
Visit shop1 offer from £35.92
View price history by clicking the chart icon.
This CubeTECH Insulated Ducting is designed for users with high-flow inline fan extractor systems, such as bathroom ventilation or HVAC setups, offering excellent thermal insulation and a durable, flexible design. Its key benefit is improved system efficiency through reduced heat loss and condensation prevention. A potential caveat is its 100mm standard diameter, which requires compatible fittings.
| Model Part Number | CT-DUCT-INS100/10 |
|---|---|
| Brand | CubeTECH |
The insulated core significantly reduces heat loss from the air passing through the duct and prevents condensation from forming on the outside of the duct, which improves system efficiency and protects surrounding areas.
This ducting is specifically designed for inline extractor fans and HVAC systems. For cooker hoods, which typically handle much higher temperatures, a specialized high-temperature ducting solution is recommended.
The ducting is highly flexible, allowing it to be routed easily around obstacles. However, avoid creating excessively tight bends, which can restrict airflow.
You can cut the ducting using sharp shears or a utility knife. Ensure the cut is clean and straight to maintain a good seal when connecting.
While the outer jacket provides protection, prolonged exposure to harsh weather conditions might affect its lifespan. It is primarily designed for use within building structures or protected exterior runs.
Specific operating temperature limits are not provided, but it is designed for typical bathroom extraction and HVAC applications, not high-temperature exhaust like from a dryer vent or cooker hood.
Basic tools such as sharp shears or a utility knife for cutting, and screwdriver or pliers for securing clamps, are generally sufficient for installation.
Check for kinks or sharp bends in the ducting. Ensure the duct is not crushed. Inspect for blockages at the fan inlet/outlet or at the exterior vent. Verify that the fan is operating at its rated speed.
Ensure the insulated layer is intact and properly seated. Verify that the duct is fully sealed at all connections. If operating in extremely humid or cold environments, consider additional external insulation or ensuring adequate room ventilation.
Ensure you are using a compatible 100mm diameter clamp or fitting. Gently warm the end of the ducting with a hairdryer on a low setting to make it more pliable for easier fitting, then secure with a clamp.
Setup: Unpack the ducting and carefully unroll it to its full length, allowing it to relax. Route the ducting as required, bending it gently around obstacles. Securely attach one end to your fan outlet or vent using a compatible clamp or fitting, ensuring an airtight seal. Cut the ducting to the desired length using sharp shears or a utility knife. Attach the other end to the inlet of your inline fan or the exterior vent.
Compatibility: This ducting features a standard 100mm (4-inch) diameter, making it compatible with most domestic extractor fans, tumble dryer vents, HVAC systems, and general ventilation units designed for this size.
Care: Regularly inspect the ducting for any signs of damage or wear. Keep the exterior clean by wiping with a damp cloth. Ensure that airflow is not obstructed by debris, particularly at connection points. Periodically check seals and clamps for integrity.
