The Faller Up and Over Bridge Set is a comprehensive model kit designed for HO gauge track layouts...The Faller Up and Over Bridge Set is a comprehensive model kit designed for HO gauge track layouts. This set allows for the creation of intricate ascents and descents, featuring 4 straight and 8 curved track beds, various supports ranging from 15 mm to 65 mm, 4 pillars of 75 mm, and 6 pillar headpieces of 8 mm for height extension. The track beds are compatible with standard model and C tracks, providing a versatile solution for expanding your model railway system. Connecting tabs are included to ensure stable assembly. The set can be further expanded using additional Faller accessories such as pillars (Art. 120473), straight track beds (Art. 120474), and curved track beds (Art. 120475).
The Faller Up and Over Bridge Set (120470) is designed for serious HO gauge model railway enthusiasts looking to add vertical complexity and realistic terrain variations to their layouts. This comprehensive kit provides all the structural components necessary to construct dynamic inclines and bridges, offering significant visual interest and operational variety for your model trains. While the system is highly versatile and modular, users should note that it requires careful planning of track gradients to ensure locomotives can successfully navigate the steeper ascents without slipping.
All features
Model Part Number
120470
Brand
Faller
Extended Product Information
FAQs
Is this kit suitable for N-scale trains?
No, this kit is specifically designed for HO gauge (1:87 scale) layouts.
Can I expand this set later?
Yes, it is fully compatible with Faller accessories like pillars (120473) and additional straight or curved track beds.
Do the tracks come included in the kit?
The kit includes the plastic track bed supports and structures, but not the actual electrical train tracks.
What is the maximum height this bridge can reach?
With the included 75 mm pillars and 8 mm headpieces, you can reach heights exceeding 80 mm depending on your configuration.
Is glue required for assembly?
While the parts are designed to connect via tabs, using a small amount of plastic cement is recommended for permanent layouts.
Troubleshooting
Trains slipping on the incline
Reduce the gradient by spreading the elevation gain over a longer distance using extra track beds or adjusting the pillar heights.
Bridge segments feel unstable
Ensure all connecting tabs are fully engaged and consider adding a drop of model-specific plastic adhesive if the bridge is intended for a permanent display.
Alignment issues between bridge and ground track
Verify that the pillar headpieces are correctly seated and that the track beds are level with the fixed layout tracks.
Pros and Cons
Pros
Modular design allows for custom bridge and incline configurations
Compatible with both standard and C-track HO gauge systems
Includes all necessary support heights for gradual or steep ascents
High-quality, durable construction for long-term layout use
Cons
Requires precise track planning to avoid excessive gradients
Assembly requires attention to detail to ensure stable connections
Additional track beds may be needed for very long bridge spans
Setup, Compatibility & Care
Planning: Lay out your desired path on your baseboard, marking the start and end points of the incline.
Support Placement: Start with the lowest support heights and gradually increase them to achieve your desired gradient.
Securing: Use the provided connecting tabs to link the track beds firmly. Ensure each pillar is securely seated on the layout surface to prevent wobbling.
Compatibility: This kit is specifically for HO gauge. If using C-tracks, ensure they snap securely into the bridge base profiles.
Maintenance: Periodically check the connecting tabs for signs of stress and ensure that the pillars have not shifted due to surface vibration. Clean dust from the track beds using a soft brush to ensure optimal electrical contact.