Hultafors CLP30 Chalk Line - 30m

The Hultafors CLP30 Chalk Line is designed for standard powdered chalk. Ensure it is dry and free from large clumps for best results.

The housing cap can hold up to 100g of chalk.

While it will mark, using the chalk line on very wet surfaces may result in poor line visibility and could affect the chalk's performance. It is best used on dry or slightly damp surfaces.

The chalk line features a 3:1 gear ratio, which means the crank turns three times for every one turn of the internal spool, allowing for faster line retraction.

The crank can be locked in both open and closed positions for secure storage and transport.

The line is made from a braided cotton/polyester blend, chosen for its high chalk absorption properties.

While not explicitly stated, lines on chalk reels are typically replaceable. Inspect the reel for access points or consult Hultafors support if needed.

Ensure the line is adequately coated with chalk powder. Check if the chalk is old or has clumped. Refill with fresh, dry chalk. Ensure the line is snapped firmly against the surface.

Check for any obstructions or tangles in the line. Ensure the crank mechanism is free of debris. Do not force the crank; gently work the line free.

Ensure the refill opening is clear. Pour chalk slowly and steadily into the opening. Make sure the bayonet cap is properly aligned and secured before closing.

Inspect the crank mechanism for dirt or grit. Clean gently with a dry cloth. If stiffness persists, a small amount of lubricant suitable for tools may be applied to the crank axle (refer to manufacturer recommendations if available).