Setup, Compatibility & Care
Setup:
Ensure your subfloor is clean, dry, level, and smooth before installation. Remove any existing flooring if necessary. Acclimatize the flooring panels in the room for at least 48 hours before installation.
Installation:
Begin laying planks from one corner of the room. Engage the click-fit system by angling the edge of one plank into the groove of another and pressing down firmly. Ensure a tight fit between planks. Use a tapping block and mallet gently if needed to secure the joints.
Compatibility:
- Subfloors: Suitable for concrete, existing tile, wood, and vinyl subfloors, provided they are level and smooth.
- Underfloor Heating: Compatible with *piped water* underfloor heating systems only. The maximum surface temperature should not exceed 27°C. Avoid electric underfloor heating systems.
- Adhesives: No adhesive is required due to the click-fit system.
Care:
- Cleaning: Sweep or vacuum regularly to remove dust and debris. For deeper cleaning, use a damp mop with a mild, pH-neutral floor cleaner. Avoid abrasive cleaners or excessive water.
- Protection: Use felt pads on furniture legs to prevent scratching. Avoid dragging heavy items across the floor.
- Spills: Wipe up spills immediately with a soft cloth.