Heavy Duty Stapler - Foska ST2018

The Foska ST2018 can staple up to 240 sheets of standard paper at once.

This is a heavy-duty stapler and requires specific heavy-duty staples. Please refer to the product packaging or manual for the exact compatible staple sizes (e.g., series 23).

The stapling depth is 51mm, meaning it can staple documents up to 51mm from the edge of the paper.

While it can be used at home, its heavy-duty capacity and size are optimized for demanding office or professional environments. It may be larger than typically needed for light home use.

Lift the top arm of the stapler, insert a strip of the correct heavy-duty staples into the channel, and then close the top arm firmly until it clicks shut.

No, exceeding the 240-sheet capacity can cause jamming, damage to the stapler, and incomplete stapling. Always adhere to the specified capacity.

Wipe the exterior with a dry cloth. Use a small brush to gently remove paper dust or debris from the staple channel and anvil. Avoid using liquids directly on the mechanism.

Ensure you are using the correct size and type of heavy-duty staples. Remove any jammed staples carefully and check the staple channel for debris. Do not overload the stapler beyond its 240-sheet capacity.

Verify the number of sheets does not exceed the 240-sheet limit. Ensure the staples are fully loaded and correctly seated in the channel. Check if the anvil (the base plate where staples bend) is properly aligned and clean.

Check for obstructions in the mechanism. Ensure staples are loaded correctly and the stapler is not jammed. Light lubrication on moving parts may be considered if recommended by the manufacturer, but avoid over-lubrication.

Clean the anvil on the base plate, as debris can prevent proper staple formation. Ensure the staple strip is straight and not bent before loading.