Best current price£10.98from Amazon
Shopping.co.uk recommended and popular offers
Amazon£10.98Visit shop Modelcraft Blue Flexible Masking Tape Four Pack, 1, 2, 3 & 6Mm Pma3000/4
Visit shop2 offers from £10.98 - £13.00
View price history by clicking the chart icon.
This Modelcraft Flexible Masking Tape Set is designed for hobbyists, modelers, and DIY enthusiasts requiring precise masking for intricate projects. Its key benefit is the ability to conform to curved surfaces without creasing or tearing, ensuring clean paint lines and preventing bleed. A minor caveat is that the adhesive, while strong enough for clean removal, may require careful application on highly textured surfaces. This set includes four rolls of acid-free, blue tape in various widths for versatile application.
| Model Part Number | PMA3000/4 |
|---|---|
| Brand | Modelcraft |
The tape is suitable for most common surfaces encountered in modeling and crafts, including plastic, metal, wood, glass, and painted surfaces. Always test on an inconspicuous area first if unsure.
This is a four-piece set, including one roll each of 1mm, 2mm, 3mm, and 6mm wide tape.
Each roll measures 18 meters (approximately 59.1 feet) in length.
Yes, it is generally compatible with solvent-based paints. However, ensure the painted surface is fully cured before applying the tape and remove the tape promptly after painting to avoid issues.
No, this masking tape is designed for single-use application to ensure optimal adhesion and clean removal without leaving residue.
Acid-free means the tape does not contain acidic compounds that could damage or discolor materials over time, making it safe for use on photographs, delicate paper, and other sensitive surfaces.
Ensure the surface is clean, dry, and free from dust, grease, or oil. For very porous surfaces, a light coat of sealant or primer might be needed before applying the tape.
Press down the edges of the tape firmly to ensure a complete seal. Avoid applying paint too thickly near the tape edge. For very fine lines, consider using a solvent-based paint with less flow.
Apply the tape gently and avoid stretching it excessively. When removing, pull slowly and at a low angle, away from the painted line. If the tape feels stuck, try gently warming the edge with a hairdryer on a low setting.
While designed for clean removal, in rare cases, residue can occur. Gently wipe the area with a clean cloth dampened with a mild solvent like isopropyl alcohol or mineral spirits. Avoid harsh chemicals.
Setup: No specific setup is required. Simply unroll the desired width of tape and apply it carefully to the surface you wish to mask. Ensure the tape is pressed down firmly along its edges to create a seal, especially on contoured surfaces.
Compatibility: This tape is compatible with a wide range of paints and finishes, including acrylics, enamels, and lacquers commonly used in modeling and arts. It adheres well to plastics, metal, wood, and finished painted surfaces. It is recommended to test on an inconspicuous area first if using on delicate or unproven surfaces.
Care: Store the tape rolls in a cool, dry place away from direct sunlight to preserve the adhesive properties. Keep the rolls clean and free from dust and debris before use. After removal, clean any minor adhesive traces with a mild solvent if necessary, though the tape is designed for residue-free removal.
