Best current price£6.00from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£6.00Visit shop Jaw Jaw Turnbuckle Stainless Steel M5 (Open Body Wire Rope Rigging) 707152586948
Visit shop1 offer from £6.00
View price history by clicking the chart icon.
This M5 Jaw Jaw Turnbuckle from SecureFix Direct is designed for users needing reliable tension adjustment for ropes, wires, or cables in demanding environments like marine or garden applications. Its key benefit is the robust 316-grade stainless steel construction, offering superior rust protection. A potential caveat is its specific M5 thread size, requiring compatible fittings for optimal use.
| Colour | Silver |
|---|---|
| Model Part Number | SFSSTJJ05 |
| Brand | SecureFix Direct |
This turnbuckle is primarily used for adjusting tension in ropes, wires, and cables, commonly in garden, marine, and sports rigging applications where moderate tension control is needed.
316 grade stainless steel offers superior resistance to corrosion, pitting, and rust compared to other grades, making it highly durable in saltwater and humid environments.
The breaking load for this M5 Jaw Jaw Turnbuckle is 561 KG.
Consider the diameter of the wire or rope you are using, the required tension, and the overall length of the span. Also, ensure the jaw opening dimensions (A=7mm, B=5mm) are compatible with your connecting hardware. For safety, always apply a working load limit that is a fraction of the breaking load.
This turnbuckle is designed for tensioning and rigging, not for lifting heavy loads. Always use hardware specifically rated for lifting and adhere to a safety factor (typically 4:1 or 5:1) for the working load limit.
You would typically use a shackle, carabiner, or a specific rigging connector that fits through the jaw opening (A=7mm, B=5mm) and can then be attached to your rope or wire.
The total length adjustment is determined by the thread length and the turnbuckle's overall span. For this M5 unit, the body length (E) is 116mm and the total extended length (F) is 175.4mm, indicating the range of adjustment available.
Clean the threads thoroughly to remove any debris or corrosion. Apply a small amount of marine-grade lubricant to the threads and work the turnbuckle back and forth.
Ensure the hardware being used (e.g., shackle, eye bolt) fits within the jaw opening dimensions (A=7mm, B=5mm) and has a compatible pin or connection point.
While 316 stainless steel is highly resistant, prolonged exposure to harsh conditions can cause minor surface oxidation. Clean with a stainless steel cleaner or a paste of baking soda and water. If significant corrosion is present, consider replacing the unit to ensure safety.
Ensure the turnbuckle is fully extended and that the lines/wires being tensioned are properly attached. For longer spans or higher tension requirements, a larger or longer turnbuckle may be necessary.
Setup: To set up, attach a compatible shackle, eye bolt, or rigging screw to each jaw end. Ensure the jaw opening is suitable for your chosen connecting hardware. Thread the two ends of the turnbuckle together to achieve initial slack. Once connected to your lines or wires, rotate the body of the turnbuckle to increase or decrease tension. The maximum recommended working load should not exceed the breaking load divided by a safety factor (typically 4:1 or 5:1).
Compatibility: This M5 turnbuckle is designed to connect with M5-sized hardware or items that can fit within its jaw opening (A=7mm, B=5mm). It is compatible with ropes, wires, and cables up to a certain diameter that can be securely fastened within the jaws or through attached connectors.
Care: Clean the turnbuckle regularly with a damp cloth to remove salt, dirt, or debris, especially after exposure to marine or outdoor environments. Periodically inspect the threads for damage and ensure smooth operation. For long-term storage, a light application of marine-grade lubricant on the threads can help maintain ease of movement and prevent seizing.
