Best current price£16.99from Amazon
Shopping.co.uk recommended and popular offers
Amazon£16.99Visit shop TP-Link Gigabit SFP Media Converter, Complies with IEEE 802.3ab and IEEE 802.3z, FX Port Supports Hot-Swappable (MC220L)
Visit shop38 offers from £16.99 - £63.36
View price history by clicking the chart icon.
4 offers from £12.98 - £16.19
View price history by clicking the chart icon.
The TP-Link MC200CM V3 is a high-performance media converter designed for network professionals and IT managers looking to extend their network reach. Its key benefit is seamless conversion between Gigabit Ethernet (copper) and Gigabit Fiber (multi-mode SC), enabling high-speed data transfer up to 550 meters. A potential caveat is its reliance on multi-mode fiber, limiting its direct use for very long-haul connections without additional equipment. This device is ideal for bridging different network segments with its support for IEEE 802.3ab and 802.3z standards, Auto MDI/MDI-X, and front-panel status LEDs.
| Model Part Number | MC200CM V3 |
|---|---|
| Brand | TP-LINK |
The MC200CM V3 can transmit data up to a maximum distance of 550 meters when using multi-mode fiber optic cable.
No, the MC200CM V3 is designed specifically for multi-mode fiber optic cable with an SC-Type connector and operates at a wavelength of 850 nm.
While the MC200CM V3 is a Gigabit converter, it can often auto-negotiate down to 100 Mbps if connected to a device that does not support Gigabit speeds, though optimal performance is at 1000 Mbps.
It is recommended to use Cat5e or Cat6 Ethernet cables for the copper (RJ-45) connection to ensure optimal Gigabit performance.
As a standalone media converter, the MC200CM V3 does not offer remote management features. However, when installed in a TP-Link chassis (like the MCH5000), it can be managed through the chassis's management interface.
Auto MDI/MDI-X allows the port to automatically detect whether a straight-through or crossover Ethernet cable is needed, simplifying connection setup without manual configuration.
Ensure the power adapter is securely connected to both the device and a working power outlet. Check if the power LED is illuminated.
Verify the Ethernet cable is properly connected to both the MC200CM and the network device. Ensure the connected device is powered on and configured for Gigabit speed. Test with a different Ethernet cable.
Confirm the fiber optic cable is securely connected to the SC port on the MC200CM and the corresponding port on the fiber network device. Ensure the fiber cable is compatible (multi-mode) and not damaged. Check the fiber port LEDs.
Ensure both the copper and fiber connections are operating at Gigabit speeds. Check for any network congestion or performance issues on connected devices. Verify that the connected devices support Auto MDI/MDI-X if not using a crossover cable.
Verify that the wavelength (850 nm) and fiber type (multi-mode) are correct for both connected devices. Ensure the maximum transfer distance of 550 meters is not exceeded.
Setup:
Compatibility:
Care:
