Bosch Multi-purpose Drill Bit Set - SDS-Quick, 5/6/8 mm, 3-piece

This set is designed for multi-purpose use and is suitable for masonry, tiles, wood, thin metal, and light concrete.

SDS-Quick is a shank system designed for efficient power transmission. It features a form-locking connection that reduces friction and optimizes torque transfer, allowing for quick and easy bit changes without tools.

Yes, these drill bits require a power tool, such as a rotary hammer or drill driver, that is equipped with an SDS-Quick mount.

You can change the drill bits quickly and without tools by withdrawing the chuck sleeve on your SDS-Quick compatible tool, inserting the new bit, and releasing the sleeve until it locks into place.

The set includes three drill bits with diameters of Ø 5 mm, 6 mm, and 8 mm.

No, these bits are specifically designed for tools with an SDS-Quick mount and cannot be used with standard keyed or keyless drill chucks.

After use, clean the bits with a dry cloth to remove dust and debris. Store them in a dry place to prevent rust and inspect them regularly for wear or damage.

Ensure the SDS-Quick chuck sleeve is fully retracted before insertion and release. Clean any debris from the chuck and the bit shank. Check for any damage to the shank or chuck.

Verify that the drill bit is appropriate for the material. Ensure the SDS-Quick system is functioning correctly and the bit is securely locked. Check for excessive heat, which may indicate a dull bit or too much pressure. Clean any obstructions in the hole.

Confirm the SDS-Quick bit is fully seated in the chuck and properly locked. Ensure the chuck itself is securely attached to the tool and not worn. Check the drill bit for any signs of bending or damage.