Owatrol Floetrol Paint Conditioner - White

Floetrol is designed for use with interior and exterior emulsion and acrylic paints, and also works with coloured wood stains. Always test for compatibility first.

Refer to the product label for specific instructions. Generally, a ratio of 1:16 (Floetrol:Paint) is recommended. Adjust according to your paint and conditions.

No, Floetrol is designed not to affect the inherent qualities or colour of the paint.

Yes, Floetrol is suitable for use in paint sprayers. It can allow for a pressure reduction of up to 20% without affecting the spray pattern or performance, while also helping to prevent clogging.

Clean your brushes, rollers, and spray equipment with water immediately after use.

Floetrol is water-based and generally safe to use. Always work in a well-ventilated area and follow the manufacturer's safety recommendations.

Ensure the paint and Floetrol are thoroughly mixed. You may need to add a bit more Floetrol, but do not exceed the recommended ratio. Also, ensure you are using the correct application technique.

Ensure the correct amount of Floetrol is added to the paint. Stir well, and make sure the paint and Floetrol are properly mixed. Consider adding a little more Floetrol if the issue persists, but do not exceed the recommended ratio.

Check the spray tip for any obstructions. Ensure the paint and Floetrol mixture is thoroughly mixed and that the correct pressure settings are used.

Ensure proper ventilation and check the environmental conditions (temperature and humidity). Floetrol may slightly extend drying time. Give the paint extra time to dry completely.