Noctua NT-H1 - 10g

No, Noctua NT-H1 is designed to deliver its full thermal performance immediately upon application and does not require any specific break-in or burn-in period.

NT-H1 offers excellent long-term stability. While it can be stored at room temperature for at least 3 years, its performance on a CPU remains effective for 5 years or more under typical usage conditions.

Yes, NT-H1 is non-electrically conductive and non-corroding, making it completely safe to use with any type of CPU cooler, regardless of whether it's made from copper or aluminum, or if it's nickel-plated.

A pea-sized amount or a thin line down the center of the CPU is generally sufficient for most processors. The exact amount can depend on the CPU size and the mounting pressure of your cooler. Refer to the specific instructions provided with your heatsink for detailed guidance.

It is generally recommended to clean off old thermal paste and apply a fresh layer whenever a heatsink is removed and reinstalled. This ensures optimal thermal contact and performance.

The density of Noctua NT-H1 is 2.49 g/cm³, and it operates effectively within a temperature range of -50°C to 110°C.

Ensure an adequate, but not excessive, amount of paste was used. Re-apply, making sure the heatsink is mounted with even and firm pressure. Check that the heatsink is properly seated and that no plastic films were left on the cooler's base.

NT-H1 is designed to spread under heatsink pressure. Ensure the cooler is mounted firmly. If ambient temperatures are very low, warming the paste slightly (e.g., by leaving it in a warm room for a while) can improve viscosity, though this is rarely necessary.

Use a dry, lint-free cloth or paper towel to remove the majority of the paste. For stubborn residue, a cloth lightly dampened with water is usually sufficient. Avoid using alcohol or aggressive solvents, which can sometimes react with cooler finishes.