Macpherson Trade Undercoat - White

This undercoat is suitable for a variety of surfaces, including wood and properly prepared plaster, before applying your topcoat.

Generally, one coat is sufficient, but two coats may be needed for some surfaces or when changing colours significantly.

Refer to the product label for specific drying times, but generally, allow at least 16-24 hours.

This undercoat is designed to be used with alkyd based paints. Always check the topcoat manufacturer's recommendations.

Clean brushes and rollers with a suitable solvent, such as white spirit, immediately after use.

Coverage depends on the surface and application method. Refer to the product label for approximate coverage details.

This undercoat is suitable for interior and exterior use. Always check the topcoat's suitability for exterior applications.

Ensure the surface is properly prepared (clean, dry, and sanded if necessary).

Apply the undercoat in thin, even coats, and avoid over-brushing.

Ensure adequate ventilation and allow sufficient drying time between coats.