Best current price£6.69from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£6.69Visit shop Supadec Grade Super Glue For Bonds, Pvcu, Metal, Aluminium 50Gm 5017193577191
Visit shop
B&Q£6.99Visit shop B&Q - Industrial Grade Super-Glue 50GQuick CureStrong BondHeavy Duty Glue For PvcuMetalAluminiumCeramics & Epdm
Visit shop2 offers from £6.69 - £6.99
View price history by clicking the chart icon.
The Supadec Industrial Grade Super Glue is designed for DIY enthusiasts and trade professionals who require a high-strength, fast-curing adhesive for demanding bonding tasks. Its primary benefit is its versatility and industrial-level durability across materials like metal, PVCu, and ceramics, though users should exercise caution as the rapid-bonding formula requires careful, precise application to avoid accidental skin or surface contact.
| Brand | Supadec |
|---|
It is specifically formulated for PVCu and similar rigid plastics; however, it is not recommended for polyethylene or polypropylene.
It offers standard resistance suitable for most indoor and light outdoor applications, but it is not intended for high-temperature industrial environments.
If the glue has not fully cured, acetone or a dedicated super glue remover can help, though you should test on an inconspicuous area first.
While it can bond wood, it is best suited for non-porous materials like metal or ceramic where the bond remains rigid.
Store in a cool, dry place in an upright position with the cap tightly secured to prevent moisture-induced hardening.
The surfaces may be too cold or damp. Ensure both materials are dry and at room temperature before reapplying.
Use a small needle to clear the dried adhesive from the tip. If the clog is severe, you may need to cut a tiny sliver off the tip of the nozzle.
Check if the surfaces were properly cleaned of oils or dust. Use an alcohol-based cleaner to degrease surfaces before attempting to bond again.
Before starting, wear protective gloves to prevent accidental skin contact. To apply, ensure both surfaces are dry and dust-free. Apply a small amount of adhesive to one surface and press the components firmly together for 10-30 seconds. For maximum bond strength, allow 24 hours for the adhesive to achieve full chemical cure. When finished, wipe the applicator nozzle clean with a lint-free cloth and replace the cap immediately to prevent the glue from drying inside the tip. Store the bottle upright in a cool, dry place away from direct sunlight to maintain the product's shelf life.
