Rechargeable Wireless Motion Sensor LED Strip Light - Auraglow

Detach the controller from its magnetic base and use the included micro USB cable to connect it to a USB power source.

Battery life varies based on usage and timer settings. Typically, it can last several weeks on a single charge with moderate use.

Yes, the LED strip can be cut to length to fit your specific needs.

The light can be attached to most clean and dry surfaces using the 3M adhesive backing.

The motion sensor has a range of up to 5 meters.

The timer settings are usually adjusted via a switch or button on the controller. Refer to the product packaging or manual for exact instructions.

While it can be used in some protected outdoor areas, it's primarily designed for indoor use. Avoid direct exposure to rain or extreme weather conditions.

Ensure the controller is charged. Check the power switch and ensure the light sensor is not activated in a well-lit environment. Try resetting the controller.

Make sure the sensor is not blocked. Check the sensor's range and ensure it's within 5 meters. Reset the controller.

Adjust the timer setting to a longer duration.

Check the light sensitivity setting to ensure it is not set to 'always on'. Ensure the sensor isn't picking up any continuous movement.