Best current price£5.59from Amazon
Shopping.co.uk recommended and popular offers
Amazon£5.59Visit shop Uxcell Silver/Gray Sourcingmap 1/4 Inch Hex Shank 1.5Mm Hexagon Head Magnetic Screwdriver Bits 5Pcs
Visit shop4 offers from £5.59 - £9.99
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals who need reliable screwdriver bits for power and air tools. The key benefit is their hex tip and shank design for efficient screw driving. A potential caveat is their specific application for hex head screws only. These uxcell screwdriver bits are designed with a hex tip head and hex shank, making them suitable for use with power tools and air tools to drive hex head screws. They are easy to install on a screwdriver handle, offering a practical solution for various fastening tasks.
| Model Part Number | S2H1/4 |
|---|---|
| Brand | uxcell |
These bits are specifically designed for driving screws with hexagon (hex) heads.
Yes, as long as your standard drill has a chuck that can securely grip the 1/4 inch hex shank.
Yes, the hex shank and robust design make them suitable for use with impact tools and air tools.
Wipe the magnetic tip with a clean, dry cloth to remove any metal particles that may reduce its magnetic strength.
The shank size is 1/4 inch, which is a standard size for most power tools.
Yes, this product line is available in various lengths such as 50mm, 75mm, and 100mm, along with different head sizes.
Ensure you are using the correct size bit for the screw head. Check if the screw head is stripped. Verify the bit is fully inserted into the tool's chuck and securely tightened.
Confirm the bit has a 1/4 inch hex shank. Ensure the tool's chuck is clean and properly tightened around the bit shank. Try a different bit to rule out a faulty tool chuck.
Clean the magnetic tip with a dry cloth to remove any metal shavings or debris that might be interfering with the magnetism.
Setup: Simply insert the hex shank of the screwdriver bit into the chuck of your compatible power tool or air tool. Ensure it is seated firmly and tighten the chuck to secure the bit.
Compatibility: These bits are designed for use with standard 1/4 inch hex shank receivers found on most impact drivers, drills, and air tools. They are specifically intended for driving screws with matching hexagon (hex) heads.
Care: To maintain performance, periodically clean the bits to remove debris and rust. Store them in a dry place to prevent corrosion. Inspect bits for wear or damage before each use and replace if compromised.
