StarTech.com Slim CAT6 Cable - Purple - 1m

Best current price£8.24from PCHUB.UK
Best offers
Shopping.co.uk recommended and popular offers
Startech.com Purple 1M Slim Cat6 Ethernet Cable. Snagless. 100W Poe. U
Visit shop
Best current price£8.24from PCHUB.UK
Shopping.co.uk recommended and popular offers
Startech.com Purple 1M Slim Cat6 Ethernet Cable. Snagless. 100W Poe. U
Visit shop4 offers from £8.24 - £11.15
View price history by clicking the chart icon.
This 1m purple Slim CAT6 Ethernet Cable from StarTech.com is designed for high-density network installations where space and airflow are critical. It offers reliable Gigabit and Power over Ethernet (PoE++) connectivity up to 100W, making it ideal for powering network devices. While its slim profile enhances flexibility and airflow, the 1m length might be a limitation for longer runs.
| Series | Slim CAT6 |
|---|---|
| Model Part Number | N6PAT100CMPLS |
| Brand | StarTech.com |
The primary advantage is its significantly smaller diameter (3.6mm vs. standard ~6mm), which allows for better airflow, easier routing in high-density environments, and potentially fitting more cables in the same space.
This is a Cat6 cable, which is specified for up to 1000Mbps (1Gbps) at distances up to 100 meters. For 10Gbps, you would typically need Cat6a or higher.
LSZH stands for Low Smoke Zero Halogen. This jacket material emits very little smoke and no toxic halogens when exposed to extreme heat or fire, making it safer for indoor installations, especially in public or poorly ventilated areas.
This cable complies with IEEE 802.3bt Type 4 PoE++ specifications, capable of reliably delivering up to 100W of power to connected devices.
Yes, the cable features snagless RJ45 connectors. These have a boot design that protects the locking clip, preventing it from snagging or breaking during installation or removal.
No, this is an Unshielded Twisted Pair (UTP) cable. While it's tested for minimal Near-End Crosstalk (NEXT), it does not have additional shielding against external electromagnetic interference.
The conductors are made of 28 AWG pure bare copper wire, which provides good conductivity and flexibility.
Ensure both RJ45 connectors are securely seated in their ports. Verify that the connected devices are powered on and configured correctly. Test with a different Ethernet cable to rule out a cable fault. Check network switch port status.
Confirm that the cable is Cat6 compliant and the connected devices support Gigabit Ethernet. Check for excessive length or damage to the cable. Ensure other devices on the network are not consuming excessive bandwidth. Inspect connectors for debris or damage.
Verify that the power source (e.g., PoE switch) is providing sufficient power (up to 100W) and is IEEE 802.3bt compliant. Ensure the connected device is compatible with PoE++ and does not exceed the 100W budget. Test with a known working PoE device and cable.
Check for physical damage to the cable, especially near the connectors. Ensure the cable is not routed near sources of strong electromagnetic interference. Reseat the connectors. Test with a shorter, known good cable if possible.
Setup:
This is a Plug and Play device. Simply connect one RJ45 connector to your network device (e.g., computer, switch, router) and the other RJ45 connector to your network source.
Compatibility:
Care Instructions: