Proximity RFID Card Reader - UHPPOTE - 26/34 bits
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This UHPPOTE Proximity RFID Card Reader is designed for access control systems in various environments, including factories, homes, residential areas, and offices. Its primary benefit is providing a fast and reliable method for identifying authorized users with support for both Wiegand 26-bit and 34-bit output formats. A potential consideration is that it requires integration into an existing access control system to function.
All features
| Model Part Number | 26/34 |
|---|---|
| Brand | UHPPOTE |
Extended Product Information
FAQs
What type of RFID cards does this reader support?
This reader is designed for standard 125KHz proximity RFID cards, commonly used in Wiegand-based access control systems.
Can this reader be used outdoors?
Yes, it is waterproof and conforms to IP66 standards, making it suitable for outdoor installation.
What Wiegand formats does it support?
It supports both Wiegand 26-bit and Wiegand 34-bit output formats.
Does this reader require a separate power supply?
Yes, it requires a stable power supply, typically 12V DC, which needs to be connected from your access control system.
Is the reader difficult to install?
Installation involves wiring the reader to an existing access control panel. Basic knowledge of wiring and access control systems is recommended. Refer to your access control panel's manual for specific connection details.
What is the read range of the RFID cards?
The exact read range can vary based on the card type and environmental factors, but it is optimized for typical proximity access control use where cards are presented within a few inches of the reader.
Does this reader store card data?
No, this reader outputs the card's data to an access control panel. It does not store cardholder information or access logs itself.
Troubleshooting
Reader not responding to cards
Verify power supply to the reader. Check Wiegand data connections to the access control panel. Ensure the access control panel is configured for the correct Wiegand format (26 or 34 bit).
Slow or no door opening response
Confirm the reader is correctly wired and receiving adequate power. Check the configuration and response settings on the access control panel. Ensure the card is presented correctly within the read range.
Reader exposed to water damage
While rated IP66, prolonged submersion or high-pressure water jets can compromise seals. Inspect for any physical damage to the casing. Ensure any cable entry points are properly sealed.
Inconsistent reading of RFID cards
Ensure cards are presented directly in front of the reader. Check for potential interference from other electronic devices or metal objects. Test with multiple known-good cards.
Pros and Cons
Pros
- Durable and waterproof (IP66 rated) for outdoor installation.
- Supports two common Wiegand formats (26-bit and 34-bit).
- Energy-efficient with low standby power consumption.
- Rapid response time for user convenience.
- Versatile for various access control applications.
Cons
- Requires integration with a compatible access control panel.
- Does not include reader software or management features.
- Relies on external power supply.
- Does not support encrypted card data for enhanced security.
Setup, Compatibility & Care
Setup:
- Wiring: Connect the reader to your existing access control panel using the appropriate Wiegand (Data 0, Data 1), power (VCC, GND), and potentially LED/Buzzer control wires as per the access control panel's manual.
- Power: Ensure a stable power supply is provided to the reader, typically 12V DC.
- Configuration: Configure the access control panel to recognize either Wiegand 26-bit or 34-bit format, depending on your card system.
Compatibility:
- Wiegand Protocol: Compatible with standard Wiegand 26-bit and 34-bit interfaces. Ensure your access control panel supports one of these formats.
- Card Type: Designed for proximity RFID cards operating at 125KHz frequency (standard for many access control systems).
- Environment: Suitable for indoor and outdoor use due to its IP66 rating.
Care:
- Clean the reader's surface periodically with a soft, dry or slightly damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Ensure wiring connections remain secure and free from corrosion, especially in outdoor installations.