Sealey Air Conditioning Pressure Test Connector Kit - 13pc - VSAC135

The recommended test pressure varies by vehicle manufacturer. Consult your vehicle's service manual for the specific pressure required for leak testing your AC system.

No, this kit is for connecting to the AC system to allow for pressurization. A separate pressure gauge and regulator are required to monitor the pressure during the test.

This kit is designed solely for pressure testing and leak detection. It is not intended for evacuating or recharging the air conditioning system.

Dry nitrogen is commonly recommended for AC system leak testing. It is inert and will not damage the system components. Avoid using air, as it contains moisture.

Typically, the low-pressure (suction) service port is larger than the high-pressure (liquid) service port. The connectors in the kit are usually designed to physically match these size differences.

Please refer to the product packaging or Sealey's official website for specific warranty information. Typically, Sealey products come with a manufacturer's warranty against defects.

Ensure the service ports on the vehicle are clean and free of debris. Check the O-rings on the Sealey connectors for damage and replace if necessary. Ensure connectors are securely tightened onto the service ports.

Verify that all connections are tight. Check that the external pressure source is functioning correctly and delivering gas. Ensure the correct high/low pressure ports are being used for the test.

Inspect all components for visible signs of damage. Contact the retailer or Sealey for replacement parts if any pieces are defective upon arrival or become damaged during initial use.