SecureFix Direct Electric Fence Tester - 12000V

The SecureFix Direct Electric Fence Tester will show a clear indication of voltage. If the lights illuminate to a strong level, your fence is operating effectively. If the lights are dim, flickering, or not lit at all, it indicates a problem with voltage.

This tester is specifically designed for Low Impedance and Standard Duty Fence Controllers and Poly Wire Fencing. It may not provide accurate readings for other types of systems.

No, this electric fence tester does not require any batteries or external power source. It is powered by the electric fence itself when in use.

The ground rod should be inserted firmly into the soil to ensure good electrical contact. For optimal performance, aim for at least 6 inches (15 cm) into moist ground.

The tester has a capacity to read up to 12,000 volts (12KV). A reading close to this maximum indicates a very strong, efficient fence. Lower readings suggest reduced performance or potential issues.

Yes, the tester is designed to safely measure the voltage. It is particularly useful for confirming that power is disconnected before you handle the fence wire.

Ensure the ground rod is fully inserted into moist soil. Check that the hook is securely attached to the fence wire. Verify that the fence controller is switched on and operational.

This may indicate a weak connection or a voltage drop along the fence. Check the ground connection, ensure all fence splices are secure, and look for potential shorts or breaks in the fence line.

The fence may have a fault, be too long for the energizer, or have significant vegetation contact. Check for physical breaks, shorts caused by touching objects, or areas where grass is excessively long.