Mirka Orbital Sander Interface Pad - 150mm - HookNLoop
Best current price£10.72from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£10.72Visit shop Mirka 8295600111 150mm 6"" Orbital Sander 10mm HookNLoop Interface
Visit shopeBay£10.72Visit shop All Offers
2 offers from £10.72 - £11.09
View price history by clicking the chart icon.
eBayMirka 8295600111 150mm 6"" Orbital Sander 10mm HookNLoop Interface
Free delivery in 1–3 days
£10.72
Visit shop
OnBuy.comMirka 8295600111 150Mm 6" Orbital Sander Hooknloop Interface 6416868941203
Free delivery in 1–3 days
£11.09
Visit shop
Product Information
Full details
The Mirka 8295600111 150mm Interface Pad is for users of 150mm hook and loop orbital sanders looking to improve sanding results and dust extraction. Its key benefit is providing a cushioning layer that conforms to surfaces for better sanding and a direct path for dust to the vacuum. A caveat is that it adds thickness, which may slightly alter the tool's feel for some users. This pack contains five 10mm thick pads designed to be placed between the sander's backing pad and the sanding disc.
All features
| Model Part Number | 8295600111 |
|---|---|
| Brand | MIRKA |
Extended Product Information
FAQs
What is the purpose of an interface pad?
An interface pad provides a cushioning layer between the sander's backing pad and the sanding disc. This improves conformity to surfaces, enhances dust extraction, and protects the backing pad from wear.
How thick is this interface pad?
This Mirka interface pad is 10mm thick.
How many holes does the pad have for dust extraction?
The pad has 67 holes designed to optimize dust extraction when properly aligned with compatible sanding discs and sanders.
Can I use this with adhesive sanding discs?
No, this interface pad is specifically designed for use with hook and loop (HookIt) sanding discs, not adhesive (PSA) discs.
Will this pad fit any 150mm sander?
It fits most 150mm (6-inch) orbital sanders that utilize a hook and loop backing pad system. Always check your sander's specifications.
How often should I replace the interface pad?
The lifespan of the interface pad depends on usage intensity and care. Replace it when the hook material becomes worn, the foam is excessively compressed, or dust extraction is significantly compromised.
Does this pad reduce the need for a dust extraction system?
No, it significantly improves the efficiency of your existing dust extraction system by channeling dust more effectively, but it does not replace the need for one.
Troubleshooting
Interface pad not sticking to sander's backing pad
Ensure both the sander's backing pad and the interface pad's hook surfaces are clean and free of dust or debris. Press firmly to ensure adhesion.
Sanding disc not attaching securely to the interface pad
Check that the hook and loop surfaces on both the interface pad and the sanding disc are clean. Ensure the sanding disc is the correct size (150mm) and type for hook and loop systems.
Poor dust extraction
Verify that the holes on the interface pad, sanding disc, and sander's backing pad are properly aligned. Ensure your vacuum system is functioning correctly and that no blockages exist in the hose or tool connection.
Excessive vibration or noise
Confirm the interface pad is centered and securely attached. Ensure the sanding disc is also properly centered and flat against the interface pad. Check for any damage to the pad or disc.
Pros and Cons
Pros
- Enhances sanding performance on curved or irregular surfaces.
- Significantly improves dust extraction efficiency.
- Protects the sander's main backing pad, reducing replacement costs.
- Easy to attach and remove sanding discs.
- Increases the longevity of both sanding discs and the backing pad.
Cons
- Adds 10mm thickness, potentially changing the tool's ergonomics for some users.
- Requires a compatible hook and loop sanding disc.
- May not be suitable for applications requiring a very rigid sanding surface.
- The added layer could slightly reduce direct feedback from the surface.
Setup, Compatibility & Care
Setup:
- Ensure your orbital sander is turned off and unplugged.
- Remove the current sanding disc from your sander's backing pad.
- Align the Mirka interface pad with the hook and loop surface of your sander's backing pad. The 67 holes should align as closely as possible with the dust extraction holes on your sander.
- Firmly press the interface pad onto the backing pad to ensure secure adhesion.
- Attach your chosen hook and loop sanding disc to the interface pad, again ensuring good alignment for dust extraction.
Compatibility:
- This interface pad is designed for 150mm (6-inch) orbital sanders with hook and loop (HookIt) backing pads.
- It is optimized for use with sanding discs that also feature a hook and loop backing and corresponding dust extraction holes.
- While designed to enhance dust extraction, its effectiveness relies on the sander's vacuum system and the compatibility of the sanding disc.
Care:
- After each use, detach the sanding disc and interface pad.
- Gently brush or wipe any dust and debris from the hook and loop surfaces of both the interface pad and the sander's backing pad.
- Store the interface pads in a clean, dry place. Avoid exposing them to excessive heat or moisture, which can degrade the foam and hook material.