DZOFILM Octopus Adapter - PL Mount to DJI Ronin 4D

No, the DZOFILM Octopus Adapter is designed for the DJI Ronin 4D mount and does not require any calibration for accurate infinity focus.

The active-locking system is a mechanism within the adapter that securely grips the PL lens, eliminating any play, gaps, or wobbling to ensure a solid connection.

No, this adapter is specifically designed to mount PL-mount lenses onto the DJI Ronin 4D, which features a DX-mount. It is not compatible with Sony E-mount or other camera mounts.

No, this is a purely mechanical adapter. It does not support electronic communication for features like lens aperture control or autofocus through the camera body.

The adapter weighs approximately 154g without its attached support foot.

The support foot is designed to transfer the weight and stress of the attached lens away from the camera's lens mount and onto the adapter itself, providing greater stability and protecting the camera body.

Gently use a camera blower or a soft brush to dislodge any dust. Avoid touching the flocking directly, as it can be delicate.

Ensure the lens is fully engaged with the active-locking system. Twist the lens until it firmly locks into place. Check that the support foot is properly attached and providing stability.

Verify that the adapter was properly seated on the Ronin 4D's DX mount and that the lens is securely locked into the adapter. The adapter's precise machining should eliminate the need for back-focus adjustments.

Confirm that the flocked interior is intact and free of debris. Ensure no external light sources are directly hitting the inside of the adapter.

Check for any obstructions or debris on both the adapter's DX mount interface and the Ronin 4D's camera mount. Ensure the adapter is aligned correctly before attempting to attach.