Solvent Cement - White

The joint should be left for 5 minutes to set before handling. However, wait 12 hours before testing the installation.

No, this solvent cement is specifically designed for use with PVC and ABS soil and waste pipes.

Work in a well-ventilated area. Avoid skin contact; use gloves if possible. If contact occurs, wash thoroughly with soap and water. Keep away from heat sources and naked flames.

Store in a cool place, away from heat sources, and out of the reach of children.

Wash the affected area thoroughly with soap and water.

No, solvent weld joints are permanent and cannot be disassembled once the joint has been made.

The shelf life can vary, so always check the expiry date on the container.

Ensure the pipe was fully inserted into the fitting with cement applied to both surfaces. Allow sufficient setting time (12 hours) before testing. If the leak persists, the joint may need to be cut out and redone.

Ensure the product is within its expiry date. If it's old, it may have degraded and should be replaced. Also, ensure the container is properly sealed when not in use.

Make sure that the surfaces were clean before applying the cement, and that sufficient cement was applied to both surfaces. Allow the recommended setting time. Consider if the pipes and fittings are compatible with the cement.