Best current price£27.59from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£27.59Visit shop Schneider Electric Ca2 Auxiliary Relay - Ca2kn22p7
Visit shop
Amazon£31.32Visit shop Schneider Electric, TeSys K control relay - 2 NO + 2 NC - <= 690 V - 230 V AC coil, CA2KN22P7
Visit shop7 offers from £27.59 - £97.62
View price history by clicking the chart icon.
This guide is for electrical engineers and technicians working with industrial control systems. The Schneider Electric TeSys K CA2KN22P7 auxiliary contactor enhances control circuits with its reliable 2 NO + 2 NC configuration. A key benefit is its flexibility in managing auxiliary operations alongside main contactors. However, it's crucial to ensure correct voltage compatibility (230V AC) for optimal performance.
| Series | TeSys K |
|---|---|
| Model Part Number | CA2KN22P7 |
| Brand | Schneider Electric |
An auxiliary contactor provides additional switching contacts that mirror the state of a main contactor or operate based on a separate control signal. It's used for signaling, interlocking, and controlling auxiliary circuits.
The CA2KN22P7 has a coil designed for 230V AC.
No, this is an auxiliary contactor and is intended for use in control circuits only, not for directly switching main power loads.
The operating temperature range for this device is -25 °C to 50 °C.
The CA2KN22P7 features 2 Normally Open (NO) contacts and 2 Normally Closed (NC) contacts.
The dimensions are approximately 45 mm (width) x 57 mm (depth) x 58 mm (height).
Yes, this auxiliary contactor is part of the Schneider Electric TeSys K series.
Verify the 230V AC supply is present at the coil terminals (A1, A2). Check wiring connections for looseness. Ensure the control circuit allowing energization is active.
Confirm the coil is properly energized. Check that the auxiliary contacts are correctly wired into the circuit. Ensure no mechanical obstruction is preventing contact movement.
Ensure the coil voltage is correct (230V AC). Check ambient temperature is within the -25 °C to 50 °C range. Verify that the load on the auxiliary contacts does not exceed their rating.
Inspect wiring and connections for any damage or corrosion. Check for mechanical damage to the contactor body. Ensure the operating environment is free from excessive vibration.
Setup:
The CA2KN22P7 is designed for panel mounting. Ensure it is securely fixed to a DIN rail or mounting plate. Wire the control circuit to the coil terminals (typically A1 and A2) according to the 230V AC rating. Connect the auxiliary contacts (NO and NC) as required by your control logic.
Compatibility:
Care:
