Valterra Slide Valve - 110mm

This Valterra slide valve is designed for 110mm (approximately 4-inch) solvent weld pressure pipes.

Yes, the valve features all stainless steel components, making it suitable for use with salt and chemical treatments without compromising quality.

The valve is operated by pulling the handle to open and pushing it to close the water flow. Ensure it is moved fully to the desired position.

It is used as a cut-off valve prior to filters (like Vortex), between multiple filter units in a system, or anywhere in solvent weld pressure pipe applications to control water flow.

No, this is a manual, pull-operated valve and is not designed for integration into automated control systems.

Periodically check for smooth operation and clean any visible debris. Ensure proper curing after installation.

The valve features all stainless steel components.

Inspect the valve slot for any obstructions, debris, or sediment. Clean the area around the slide mechanism. Ensure the connected pipes are properly aligned and not putting stress on the valve body.

This may indicate wear or damage to the sealing surfaces. Check for debris lodged in the sealing area. If leakage persists, the valve may need replacement.

Ensure the valve is fully engaged. Check for any foreign objects preventing the slide from fully closing. The internal seal may be damaged or worn, requiring replacement of the valve.

Confirm you are using the correct 110mm (4-inch) diameter pipe and compatible PVC primer and solvent cement. Ensure pipe ends are clean, deburred, and properly inserted into the valve socket before the cement sets.