Carbon Monoxide Alarm - Fireangel
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Fireangel Carbon Monoxide Alarm (Model CW1-PF-T) is designed for homeowners seeking reliable CO detection with the convenience of mains power and battery backup. Its key benefit is continuous protection, even during power outages. A potential consideration is the need for mains wiring during installation. The alarm features a push-fit base for easier mounting and includes a 9V battery backup, ensuring ongoing safety.
All features
| Model Part Number | CW1-PF-T |
|---|---|
| Brand | Fireangel |
Extended Product Information
FAQs
Where is the best place to install a carbon monoxide alarm?
Install CO alarms on every level of your home and outside sleeping areas. For optimal detection, place alarms on walls at least 150mm (6 inches) from the ceiling, or on the ceiling itself. Avoid placing them near vents, fans, or in kitchens where temporary CO spikes from cooking can occur.
What is the lifespan of this carbon monoxide alarm?
The typical lifespan for a carbon monoxide alarm is 5-7 years from the date of manufacture. Always check the manufacturer's instructions or the unit itself for specific end-of-life information and replace the alarm when it reaches its expiry date.
How often should I test the alarm?
It is recommended to test your carbon monoxide alarm every week by pressing the test button. This ensures that the alarm's electronics and audible alert are functioning correctly.
What does the push-fit base do?
The push-fit base is a mounting plate designed for easier and quicker installation. It typically allows the alarm unit to twist or clip securely onto the base after the base has been wired and fixed to the wall or ceiling.
Does this alarm detect smoke?
No, the Fireangel CW1-PF-T is specifically a carbon monoxide alarm. It is designed to detect the presence of carbon monoxide gas and does not detect smoke or fire.
How do I know when the battery needs replacing?
The alarm will emit a specific intermittent chirp or tone, often accompanied by a flashing indicator light, to signal that the backup battery is low and needs to be replaced.
Troubleshooting
Alarm does not sound when test button is pressed.
Ensure the alarm is properly connected to the mains power and the backup battery is installed correctly and has power. Check your home's circuit breaker.
Low battery warning chirp continues after replacing the battery.
Ensure the new battery is correctly inserted and is a compatible type (e.g., 9V alkaline). Try a different new battery. If the problem persists, the unit may need replacement.
False alarms occurring without apparent CO presence.
Ensure the alarm is not located near cooking appliances, fireplaces, or in areas with high humidity or heavy dust. Clean the alarm vents. Consider the age of the unit; older sensors may become less reliable.
Alarm is not receiving mains power.
Verify that the mains power supply to the circuit is on. Check your home's circuit breaker. If power is present but the alarm is not receiving it, professional electrical inspection may be required.
Pros and Cons
Pros
- Reliable detection of dangerous carbon monoxide levels.
- Continuous power supply through mains connection and battery backup.
- Simplified installation with the push-fit base.
- Clear audible alerts and low battery warnings.
- Designed for enhanced home safety.
Cons
- Requires mains power wiring for initial setup.
- Battery backup may require periodic replacement.
- Limited to CO detection; does not detect smoke.
Setup, Compatibility & Care
Setup:
- Mains Connection: This alarm requires connection to your home's mains electricity supply. Ensure the power is switched off at the breaker before attempting to wire the unit. Follow the included wiring instructions carefully or consult a qualified electrician.
- Mounting: Attach the push-fit base to your chosen ceiling or wall location, ensuring it's within the manufacturer's recommended placement guidelines (typically on a wall or ceiling, away from vents and direct sunlight).
- Battery Installation: Install the 9V backup battery into its designated compartment.
- Test: Once installed and powered, press the test button to ensure the alarm sounds correctly.
Compatibility:
This alarm is designed for standard mains power installations. It is compatible with most home electrical systems. It is specifically designed for Carbon Monoxide detection and does not detect smoke or fire.
Care:
- Regular Testing: Test the alarm weekly by pressing the test button.
- Cleaning: Dust can affect sensor performance. Gently vacuum the alarm vents with a soft brush attachment or wipe with a dry, soft cloth monthly. Do not use cleaning sprays or solvents.
- Battery Replacement: Replace the 9V backup battery annually or when the low battery warning indicator sounds.
- Sensor Life: CO sensors have a finite lifespan. Check the product manual for the recommended replacement date (often 5-7 years) and replace the entire unit when it reaches its end-of-life.