Best current price£11.02from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£11.02Visit shop Startech.com Purple 7M Slim Cat6 Ethernet Cable. Snagless. 100W Poe. U
Visit shop2 offers from £11.02 - £13.22
View price history by clicking the chart icon.
This StarTech.com 7m purple slim CAT6 Ethernet cable is designed for high-density network environments where space and airflow are critical. It offers reliable Gigabit network speeds and supports up to 100W of PoE++, making it ideal for powering devices like IP cameras or wireless access points. A potential caveat is its specific 7-meter length, which may not suit all installations.
| Series | Cat6 |
|---|---|
| Model Part Number | N6PAT7MPLS |
| Brand | StarTech.com |
The primary advantage is its significantly reduced diameter (36% thinner than standard Cat6), which allows for better airflow in high-density installations and makes it easier to route in crowded network racks and patch panels.
Yes, this cable supports both reliable Gigabit data transmission and Power over Ethernet (PoE++), capable of delivering up to 100W of power to compatible devices.
LSZH stands for Low Smoke Zero Halogen. This type of jacket material is designed to emit minimal smoke and no toxic halogenated fumes when exposed to extreme heat or fire, enhancing safety in enclosed spaces.
This cable is designed for indoor, high-density network installations. It is not rated for outdoor use and should be protected from moisture, extreme temperatures outside its operating range, and UV exposure.
This Cat6 cable supports data transfer rates of up to 1000 Mbps (Gigabit Ethernet) at frequencies up to 250 MHz.
Snagless connectors have a protective boot that covers the RJ45 clip. This prevents the clip from snagging on other cables or surfaces during installation and removal, reducing the risk of breakage.
No, this cable features an Unshielded Twisted Pair (UTP) construction. It is designed to minimize interference through the twisting of the pairs but does not have an additional metallic shield.
Ensure both RJ45 connectors are fully seated and have clicked into place. Verify that the connected devices are powered on and configured correctly. Try a different network cable and port to isolate the issue.
Check for any damage to the cable or connectors. Ensure the cable is not bent sharply or kinked. Confirm that the connected devices support Gigabit Ethernet speeds. Test with a shorter, known-good cable to rule out length limitations or degradation.
Verify that your network switch or injector supports PoE++ (802.3bt Type 4) and can provide at least 100W. Ensure the PoE device itself is compatible with the power output. Check that the cable is not damaged, as this can impede power delivery.
While the cable is slim, ensure you are not forcing it around excessively sharp bends. The slim design is intended for easier routing, but extreme angles can still cause issues or damage. Gently guide the cable rather than forcing it.
Setup:
Compatibility:
Care:
