PolyX Storm Carport - White

Yes, for optimal stability, the support legs should be anchored to a level, solid concrete pad or footings.

While the kit is designed for DIY, the size and weight of the components make it a two-person job for safety and ease of assembly.

Yes, the 16mm polycarbonate sheets are treated to resist UV degradation, preventing yellowing and brittleness over time.

You will typically need a drill, spirit level, tape measure, rubber mallet, and a set of spanners or sockets as specified in the manual.

The frame comes with a durable powder-coated finish. If you wish to paint it, ensure you use a primer and paint suitable for treated metal.

For an experienced DIYer with a helper, installation usually takes one full weekend, depending on site preparation requirements.

Check the wall-flashing seal to ensure it is properly compressed and that high-quality silicone sealant is applied along the entire edge.

Verify that all glazing bar screws are tightened correctly and that the rubber seals are properly seated against the sheets.

Clear any debris from the gutter channel and check that the downpipe exit is not blocked or obstructed.