Briwax Original Antique Pine 200G

While Briwax offers protection, it is primarily designed for interior wood surfaces. For outdoor use, a dedicated exterior wood sealant is recommended for better weather resistance.

Typically, one coat is sufficient for cleaning, staining, and polishing. For enhanced protection or a deeper sheen, a second thin coat can be applied after the first has been buffed.

Briwax is best used on bare wood or over existing wood finishes. It is not designed for use on paint.

When stored in a cool, dry place with the lid tightly closed, Briwax typically has a long shelf life, often several years.

Briwax Original Antique Pine has a clear formula. While it enhances the natural wood tone and can bring out existing color, it does not add significant pigment. For added color, consider Briwax in a specific color shade or stain the wood first.

Tools and cloths used with Briwax can be cleaned with mineral spirits or turpentine.

Ensure the wax was applied in a thin, even coat and that sufficient buffing was performed. You may need to apply another thin coat and buff more thoroughly.

The wax was likely applied too thickly or not buffed enough. Allow more drying time and buff vigorously with a clean, soft cloth.

This usually indicates insufficient buffing. Buff the surface again with a clean, soft cloth until the desired sheen is achieved.

Ensure the wax is at room temperature. If it is too cold, it can be harder to apply. Warm gently in your hands or a warm, non-direct heat environment.