Cheshire Mouldings Wpkt5 Pine Slim Dado Wall Panelling Kit

You'll need a measuring tape, saw (if cutting is needed), pencil, level, adhesive (glue), nails or screws, hammer or drill, and a damp cloth for cleaning.

Yes, the dado rail can be painted. Prime the wood before applying paint for better adhesion and a smoother finish.

Each kit covers approximately 2 square meters. Measure the total wall area and divide by 2 to determine the number of kits required.

Use a wood adhesive suitable for interior applications. Ensure it is compatible with your wall surface. Construction adhesive is often a good choice.

While the kit can be used in a bathroom, ensure proper ventilation to prevent moisture damage. Consider using a moisture-resistant primer and paint.

If you need to cut the mitred corners further, a mitre box and saw are recommended for accurate cuts.

Use a level to ensure the dado rail is straight. If the wall is uneven, you may need to use shims to level the mouldings.

Double-check measurements and ensure the wall surface is even. Re-mitre if necessary.

Ensure the wall and the back of the mouldings are clean and dry. Use a suitable adhesive for the wall material and consider using temporary fixings (e.g., masking tape or nails) while the adhesive sets.

Use caulk or filler to fill the gaps and create a seamless finish. Sand the filler smooth after it dries.