Best current price£93.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£93.00Visit shop Enerj Ener-J 6500K Cob Led Strip Light 24V 30M
Visit shop
B&Q£103.00Visit shop B&Q - 24V Cob Led Strip Lights 30 Meters Reel With 480 Leds/m12W/m1200Lm/mCri 90-926500KIp68
Visit shop6 offers from £93.00 - £108.99
View price history by clicking the chart icon.
The ENER-J 24V 6500K COB LED Strip Light is designed for users seeking a seamless, ultra-bright, and uniform lighting solution for various indoor and outdoor applications. Its key benefit is the COB technology, which eliminates dark spots and provides a soft, eye-friendly glow with a high color rendering index for vibrant colors. A key consideration is that the power supply is not included and must be purchased separately. This flexible and cuttable LED strip offers a professional, high-quality illumination experience.
| Colour | White |
|---|---|
| Brand | ENER-J |
No, the power supply is not included with the ENER-J 24V 6500K COB LED Strip Light and must be purchased separately. You will need a 24V DC power supply with sufficient wattage for your desired length.
Calculate the total power consumption by multiplying the length of the strip (in meters) by 12W/meter. Choose a 24V DC power supply with a wattage rating at least 20% higher than your calculated total to ensure efficient operation and longevity.
Yes, the strip is designed to be cuttable after every 5 centimeters. Use a sharp blade and cut only at the designated marks.
An IP65 rating means the LED strip is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for many indoor and protected outdoor applications.
6500K is a cool white light, often described as daylight. It's excellent for task lighting, workspaces, or areas where bright, clear illumination is needed. For ambient or relaxing spaces, a warmer color temperature (e.g., 3000K) might be preferred.
The ENER-J COB LED Strip Light has a rated lifespan of over 50,000 hours, providing long-term, reliable illumination.
While you can cut the strip, it's generally recommended to use a single continuous run from the power source to avoid voltage drop issues and ensure uniform brightness. If connecting multiple sections, use appropriate connectors and ensure they are properly insulated and waterproofed if used in relevant environments.
Verify that the 24V DC power supply is correctly connected and providing adequate voltage. Check all connections between the power supply, any connectors, and the LED strip for a secure fit. Ensure the power supply unit is switched on and functioning correctly.
This could be due to an insufficient power supply or a loose connection. Ensure your power supply has enough wattage for the entire length of the strip. Check and re-secure all connection points.
This often indicates a poor connection point or a break in the circuit. Inspect all cut points and connections for proper contact. If a section is consistently dim, there might be damage to the strip itself.
Ensure the mounting surface is clean, dry, and free of dust or grease before applying the strip. Press firmly along the entire length of the strip for at least 30 seconds after application. For challenging surfaces, consider using additional mounting clips (sold separately).
Setup:
Compatibility:
Care:
