GoodHome Floodlights Motion Sensor

Refer to the product manual for instructions on adjusting the sensitivity settings. These settings typically involve adjusting a dial or switch to control the range of motion detection.

The detection range varies depending on the model and the sensitivity settings. Check the product specifications for the exact range.

The GoodHome Brant motion sensor is designed to work with all GoodHome wall lights and floodlights. Compatibility with other brands is not guaranteed.

Warranty information can be found in the product documentation or on the GoodHome website.

Replacing the motion sensor is straightforward. First, disconnect the power to the light fixture. Then, carefully remove the old sensor and connect the wires to the new one following the manufacturer's instructions.

To test the sensor, walk through the area it covers and see if the light turns on. You can also adjust the sensitivity and test again.

Check the power supply to the lights and the sensor. Verify that the sensor is correctly wired and that the sensitivity settings are appropriate. Ensure there are no obstructions blocking the sensor's view.

Adjust the sensitivity settings to reduce false triggers. Make sure the sensor is not pointed at heat sources (e.g., vents) or reflective surfaces (e.g., windows).

Reposition the sensor to provide a clearer view of the detection area. Check for any obstructions and adjust the sensitivity settings.